p12 WeGo User Manual
10.2 – FRONT
WHEEL ASSEMBLY
1. Lift the pushchair front axle tube
and insert the front wheel axle until
you hear a click, this will indicate
the wheel is locked into position.
Repeat for the second wheel.
2. Ensure the wheels are installed
properly before using the WeGo.
To inspect, pull the wheel to make
sure it is locked into position.
3. To lock the front wheels into position,
align them into a straight forward
position and slide the front wheel
lock guide down.
4. To unlock the front wheels,
slide the front wheel lock guide up.
10.3 – USING
THE BRAKE
1. To enable the brake press foot
down on red brake bar until
wheels are locked.
2. To release brake pull red brake bar
back up to original position.
A
A
A
A
A
A