Publicidad
Assembly
1
Attaching the legs to the top
□
Place the top(A) on a soft surface.
□
Put the legs(B)metal side into the four holes of
top(A).
□
Attention:the legs(B)must be putted as photos
requested.
□
Fasten with bolts(DD)and hand-tighten.
B
3
Adding the caps
□
Check and make adjustments as needed.
□
Fully tighten all the nuts(AA) with the wrench(EE)
and cover with the nut caps(CC).
□
Fully tighten all the bolts(DD) with the Hex
wrench(FF).
B
DD
B
A
CC
B
C
A
2
Attaching the shelf to the legs
□
Fix the bolts on the shelf(C).
□
Fasten with washers(BB) and locking nuts(AA) and
hand-tighten.
B
4
□
This table is now ready for your enjoyment.
5
Please contact 1-877-527-0313 for further assistance.
AA
BB
B
C
A
HOMEDEPOT.COM
Publicidad
