Analysis On Frequently-asked Questions
Questions
Answer
Yogurt machine button failure.
. Please check the lamp: when the lamp is red, the yogurt
machine has started to ferment,and it cannot be modified
by pressing +/- button;
. Please refer to the steps on page P to reset the
temperature or time.
There is clear liquid on the
This is the whey separated from normal fermentation, it
yogurt made.
can be mixed with yogurt and eaten.
The yogurt made is thin.
. Please refer to the recipe on page P ;
. It may be because the milk or utensils are not
sterilized/yogurt starter is not fresh and inactivated;
. It may be that too much water was added when using
milk powder to make yogurt.
. It could be that you used skim milk; whole milk makes
yogurt thicker.
Display/Lamp always o .
. Please check the power supply; after the normal yogurt
machine is powered on,the LCD display will show "- - " with
thne sound of "di", and the lamp will flash green after
pressing the" Function" button.
. It may be a machine failure, please contact us to deal
with it.
Notes: If the trouble still can not be eliminated after the above analysis, please contact
our company or our distributor. Forbid layman to disassembly the product.
Maintenance And Repairs
. You must remove the plug after use and must not wash the machine before it cools
down.
. You should wash it in time after use, otherwise there will be peculiar smell.
. Don't brush it with banana oil, petrol, abstergent, hard brush, and stainless steel ball, etc.
. Make sure not to soak or shower the outer cover. You can wipe it with soft wet cloth (not
too wet).
. When the products are not used for a long time, please clean and pack it into box, and
put in ventilative and dry place so as not to be a ected with damp.
05
Specifications
Name of product
Model
Type
Rated voltage
Rated frequency
Rated capacity
Rated power
External dimension ( Length × width × height)
Yogurt maker
SNJ-159B
Automatic yogurt maker
220-240V~
50Hz
8 glass jars (Total 1440ML)
25W
368 × 190 × 145mm
06