Read, understand, and follow these instructions to ensure safe
operation. Failure to observe these warnings can result in risk of
re or electric shock. Keep these instructions for future reference.
• DO NOT use the product if it is damaged or modified. Damaged or
modified batteries may exhibit unpredictable behavior resulting in
fire, explosion, or injury.
• Risk of fire and burns. DO NOT open, crush, heat above specified
maximum temperature or incinerate. Prolonged exposure to direct
sunlight can result in elevated temperatures.
• If the battery's internal temperature gets too high, the unit will
shut down until the internal temperature is lowered.
• DO NOT expose to moisture, rain, or snow.
• DO NOT subject to impacts or drops greater than 6.6 ft. (2 m).
Drops larger than this may not show signs of damage, but internal
components may have been compromised. It is advisable to
replace the unit if any such severe events occur.
• There are no user-serviceable parts inside. DO NOT open or
attempt to repair.
• BURN HAZARD. Reflective materials may have a higher actual
temperature than the measured temperature. Set emissivity to
match the object being measured (see Emissivity section).
• Do not point the camera at the sun or any other strong energy source.
This can affect the accuracy of the camera or cause damage to the sensor.
Warning or caution
Risk of Electrical Shock
Read instructions before using
Conformité Européenne: Conforms with European
Economic Area directives
UKCA: UK Conformity Assessment
This product has been independently tested by Intertek
and meets applicable published standards.
WEEE: Electronics disposal
WARNING SYMBOLS ON TESTER
OTHER SYMBOLS ON TESTER
USB rechargeable
USB-C Port Cover (bottom of unit)
WARNINGS
CAUTION
3