Velleman HQ-POWER MICW42-2 Manual Del Usuario página 5

b. Frequency / Channel Selection
Press SET until you see the display as below.
Wait 2 to 3 seconds. Each channel has its own frequency. Choose the channel / frequency using ▲ or ▼ and
press SET to confirm.
c. Setting the Setup Lock
Press SET until you see the display as below.
Choose whether you want to lock the present status or not by using ▲ or ▼. Press SET to confirm.
8. Monitoring Your System
Insert stereo headphones (not incl.) to monitor the vocals via
headphones.
9. The Body-Pack Transmitter (order code MICW43)
a. Description
1. antenna
2. input jack
3. LCD
4. battery compartment
5. power switch
6. ▲▼ buttons – channel / frequency selection
7. SET button
8. battery compartment
9. volume control
10. HI / LO
b. Preparing the Transmitter for Use
Open the battery compartment and insert 2 x AA batteries (order code LR6C, incl.) respecting the polarity.
Insert the plug of the microphone (order code MICW45) or the headset (order code MICW44, not incl.) into the
input jack.
c. Channel Selection
Switch on the transmitter by sliding the power switch to ON. Press SET and select the display menu (disp).
Wait 2 to 3 seconds and select the channel menu (channl) using ▲ or ▼. Press SET again to enter the
menu. You will see next display.
Wait 2 to 3 seconds. Next, you will be given the choice to lock (loc on) or to unlock (locoff) the transmitter's
settings. Choose locoff using ▲ or ▼. Press SET again to enter the menu. Choose your channel using ▲
or ▼ and press SET again to confirm.
MICW42
5 HQPOWER