Roborock E060-1P300190VE Manual De Instrucciones página 8

D2-3— Insert the roller from the side, and then
rotate the roller cover from the unlock
position to the lock position until it
clicks in place.
Cleaning the Cleaning Head
D3
and Dirty Water Pipe
1. Remove the dirty tank and the roller. Switch
off the vacuum cleaner and stabilize the
body.
2. Clean the roller slot and dirty water pipe with
the maintenance brush provided.
3. Wipe the charging contacts with a dry cloth.
4. Reinstall the roller and dirty tank in place.
D3-1—Charging Contacts
Note: Do not wash the cleaning head directly with water.
Cleaning the Charging Dock
D4
Tray
D4-1— Grasp the side handles of the tray and
pull upward.
D4-2— Rinse the tray with water and reinstall it
in place after drying.
Note: Only remove and wash the tray. Do not wash any other
parts of the charging dock.
Basic Parameters
Body
Model WD2H2A
Weight 4.1 kg
Rated power 260 W
Rated voltage
21.6 V
Charging time < 4 hours
21.6 V/4000 mAh (TYP)
Battery
Lithium-ion battery
Power Supply
E060-1P300190VE or
Model
E060-1P300190VA
Rated input 100–240 V~ 50–60 Hz, 1.5 A
Rated output
30 V 1.9 A
21.6 V/4000 mAh (TYP)
Battery
Lithium-ion battery
08
WiFi Specification
Service WiFi
Protocol 802.11b/g/n
Frequency
2400-2483.5 MHz
Range
≤20dBm
Max. Output
Power