Publicidad
Idiomas disponibles
Idiomas disponibles
Installation (continued)
3
Making the electrical connections
and attaching the canopy
NOTE: Always use wire nuts (AA) to connect wires, and
push all excess wires and connections back into the
outlet box (not included).
□
Push all slack fixture wire through the canopy loop (KK)
and into the outlet box. Trim the excess fixture wire,
leaving a minimum of 6 in. hanging out of the outlet box.
□
Connect the ground wire from the branch circuit to the
ground screw (CC) on the crossbar (DD).
□
Connect the pendant cable as follows:
WIRE MARKED
WITHOUT WORDS
FROM FIXTURE
WIRE MARKED
WITH WORDS
FROM FIXTURE
GROUND WIRE
FROM FIXTURE
Attach the canopy (FF) to the outlet box, and secure it
□
with the loop ring (LL).
CC
FF
WHITE WIRE
FROM HOUSE
BLACK WIRE
FROM HOUSE
GROUND WIRE
FROM HOUSE
DD
KK
AA
LL
4
Caulking the canopy and installing
the bulb
□
Caulk (not included) the space between the ceiling
and the canopy to prevent water seeping into the
junction box.
□
Install 60W max. ST64 bulb (not included) to the
socket of the fixture body (A).
6
A
Publicidad
