Resumen de contenidos para Foset Basic CV-TER06
- Página 1 Manual PPR Welding 800 W machine Power Applies for: Code Model 48005 CV-TER06 CV-TER06 Read this manual thoroughly CAUTION before using the tool.
- Página 2 Contents CAUTION Technical Data Power Requirements To gain the best performance of the tool, prolong the duty life, General power tool safety warnings make the Warranty valid if necessary, and to avoid hazards Parts of fatal injuries please read and understand this Manual before Start Up using the tool.
- Página 3 Technical Data CV-TER06 Code 48005 Description PPR Welding machine Voltage 120 V Frequency 60 Hz Power 800 W Power Cord Grips used in this product: Type “Y” Tool Build Quality: Basic Insulation Thermal insulation on motor winding: Class B WARNING Avoid the risk of electric shock or severe injury.
- Página 4 General power tool safety warnings WARNING! Read carefully all safety warnings and instructions listed below. Failure to comply with any of these warnings may result in electric shock, fire and / or severe damage. Save all warnings and instructions for future references.
- Página 5 Parts Heating bar Temperature selector Floor support Case 2 Allen wrenches 3 Sockets 1/2” 3/4” 1” Start Up WARNING If the power cord is damaged, it must be replaced by the manufacturer or Truper Authorized Service Center in order to ®...
- Página 6 2. Heat No leakage Simultaneously insert the tube and the connection up to Total security in the joints. Termoflow Foset® guarantees the * mark on their respective sockets, holding both that there are no leaks since it perfectly joins the tube perpendicular to the heating bar of the Welding machine.
- Página 7 Recommendations • When starting work, heat the Welding machine for 5 minutes to reach the desired temperature (392 ºF). • Use only Foset brand sockets. ® Table 2. Insertion depth • Change the sockets only with the extraction pliers and the allen key.
- Página 8 Notes ENGLISH...
- Página 9 Authorized Service Centers In the event of any problem contacting a Truper Authorized Service Center, please see our webpage www.truper.com to get an updated list, or call our toll-free numbers 800 690-6990 or 800 0187-873 to get information about the nearest Service Center.
- Página 10 Warranty policy Code Model Brand 48005 CV-TER06 Warranty. Duration: 1 year. Coverage: parts, components and workmanship against manufacturing or operating defects, except if used under conditions other than normal; when it was not operated in accordance with the instructive; was altered or repaired by personnel not authorized by Truper .