INSTALLING SNACK TRAY
1. Preparing Stroller.
(A) Set parking brake.
(B) Rotate canopy towards handlebar.
NOTE: See stroller user guide for
more information.
2. Align Attachments.
Align each attachment on snack tray to the
respective stroller accessory adapters (yellow).
3. Attach Snack Tray.
Push attachments straight onto stroller accessory
adapters. A click should be heard on each side.
4. Verify Securely Attached.
Pull on front of snack tray to verify it is securely
locked onto stroller.
CARE AND MAINTENANCE:
• Use a sponge with a solution of mild soap and cold water (maximum temperature of 100˚ F / 38˚ C).
• Rinse thoroughly with clean water to remove soap, then air dry.
• Do not use detergent or abrasive cleansers.
• Do not pressure wash.
LIMITED WARRANTY:
This product is warranted for one (1) year from the date of original purchase. Your exclusive remedy for this warranty is
that Britax
will, at its option, provide repair or replacement components for this product. This part and its components
®
are subject to change without notice. For more information visit bobgear.com.
REMOVING SNACK TRAY
1. Preparing Stroller.
(A) Set parking brake.
(B) Rotate canopy towards handlebar.
NOTE: See stroller user guide for
more information.
2. Remove Snack Tray.
(A) Empty tray of all contents.
(B) Press gray release button on both sides of the
snack tray to release attachments.
ROTATING SNACK TRAY
1. Preparing Stroller.
(A) Set parking brake.
(B) Rotate canopy towards handlebar.
NOTE: See stroller user guide for
more information.
2. Rotate Snack Tray.
(A) Empty tray of all contents.
(B) Press gray release button on either side of the
snack tray to release attachment.
(C) Rotate snack tray to the side of the stroller.
2