Vaporfi REBEL II Manual Del Usuario página 7

ADJUSTING THE VOLTAGE OR WATTAGE UP
The VaporFi Rebel II's built-in LED display allows you to dial in your preferred voltage or
wattage level.
To increase voltage or wattage, press the power up button until you reach your desired
voltage or wattage.
e.g.- 11 watts = 11P on the display
e.g. – 3.7volts appears as 3.7U on the display
NOTE: The heating element gets hotter as the voltage or wattage level increases. Always
start at a lower voltage or wattage setting and increase the power until you are satisfied
with the vapor production.
05