Publicidad
Idiomas disponibles
Idiomas disponibles
③ Camera Settings
Click Settings > Camera Settings to enter the interface.
You can select camera channel or bitrate of main stream,
as well as set up motion detection , sound detection , light or
audible alarm function (Some channels support functions
such as sound detection , sound and light alarm . Please
select the channel according to the actual situation.)
1. set up camera:
bitrate of main stream and select video encoding format.
(Note:supports 8 channels (8 cameras) simultaneous
monitoring and recording.)
2. Motion detection:
> "Channel Settings" > "Motion Detection" > "Enable" (Note:
"Motion Detection" is turned on at the factory. Sensitivity is
medium. Sensitivity is adjustable. )
① Enable: Turn on/off motion detection.
② Sensitivity: The detection sensitivity can be adjusted to [low,
medium, high]. The detection distance of motion detection
varies depending on the sensitivity setting.
③ Defense time: Set the time when the alarm can be detected.
④ Alarm method: turn on/off the detection notification
function, turn on/off the detection recording function
⑤ Set the detection area: Use the selection stick to specify
the area (the yellow
detection area). After selecting the area, click "Apply". The
setup is complete. Only detect movement within the area
after a set time Do it.
You can select camera channel, set up
Steps to set up motion detection: "Settings"
selection shown in the preview is the
EN
17
/
Publicidad
