Heath Zenith SECURE HOME DualBrite SH-4294-OR Instrucciones Para Su Instalación Y Funcionamiento página 6

MOUNTING THE LIGHT FIXTURE
1. Make sure wire connectors and wires are inside the
junction box.
2. Slide the fixture assembly onto the mounting screws.
Tighten decorative nuts removed in step 1 of Light
Fixture Installation section securely against fixture base.
Decorative Nut
3. Install one medium base light bulb (100 Watt maximum,
tungsten incandescent). See Bulb Replacement section for
bulb installation.
4. Assemble lower glass unit (see instruction sheet attached
to hardware package).
5. Install the lower glass assembly to light fixture. Secure
with decorative screws (12 mm).
Decorative
Screw (12 mm)
1. Complete the installation steps above.
2. Using the decorative screws provided, secure the lower
Junction
Box
Decorative
Screw (18 mm)
Mounting Screw
Glass Assembly
6
Lower Arm Installation
arm to the canopy and the bottom of the lower glass
assembly as shown.
Lower Arm
Decorative
Screw (24 mm)
206546-02