Publicidad
Idiomas disponibles
Idiomas disponibles
General description of functions:
1. Mode: Press to switch modes; press briefly to switch from Bluetooth (BT) to USB.
2. Volume+ / Change the song: Press to increase the volume. Hold to go to the next song.
3. On/Off: Press and hold for 3 seconds to turn on/off. Press briefly to play/pause.
4. Volume- / Previous song: Press to reduce the volume. Hold to go to the previous song.
5. TWS function: 1. Turn off Bluetooth on your phone 2. Turn on both speakers. 3. Select Bluetooth mode on both speakers. 4. Double
click the ''M'' button on the left speaker. 5. Wait for the speakers to connect to each other. 6. Turn on the phone's bluetooth and
connect it
Description of MP3 functions:
1. USB drive function: When a USB drive is inserted, the device automatically plays any MP3 and WMA files stored on USB
drive.
2. Micro SD card function: When a micro SD card is inserted, the device automatically plays any MP3 and WMA files stored
on the card.
Description of Bluetooth functions:
1. When the Bluetooth speaker is on and set in Bluetooth mode, it automatically goes into pairing standby mode.
2. Activate the Bluetooth function on your device (e.g. smartphone or tablet) and search for available devices.
3. Look for a specific model called "GADNIC A620" in the list of available Bluetooth devices.
4. The indicator light on the speaker will start flashing when it detects a pairing attempt, indicating its readiness to connect.
5. When the pairing process is successful, the indicator light will change to the state of steady light instead of flashing.
6. Manual Bluetooth pairing: Once the speaker is connected to the device, press the mode button for a few seconds to manually
enter the Bluetooth pairing mode.
7. -Call function: In Bluetooth mode, double click ''Power'' button to make a call to last one on the phone call list, and click once to
stop the phone call.
Description of charging indications:
1. Charging is required when the device enters a low power state for self-protection and the volume is reduced to
30%. Use the supplied charging cable to recharge the speaker. An illuminated red light indicates charging, and it
switches off when charging is complete.
2. Attention: Charge the device for more than 12 hours before using it for the first time. Keep the device
connected to the charger when not in use for a longer period of time to prevent damage to the battery.
3. Note: The supplied cable is for charging the speaker only. Do not connect the speaker to your phone or other
devices while charging!
4. For optimal battery preservation during a six-month storage period, it is recommended to maintain the battery
charge at approximately 65%. This helps ensure the longevity and performance of the battery when not in use.
SAFETY INSTRUCTIONS
WARNING! Always take into account the following precautions to reduce the risk of electric shock,
personal injury or fire. It is important for you to read all these instructions carefully before using the
product and keep them for future reference or new users.
•
Never use the device as a toy and keep it out of the reach of children.
•
Do not immerse the device in water.
•
Do not use the device in the presence of explosive and/or flammable vapours and/or liquids.
•
Always ensure that the charging compartment is tightly closed.
•
Never dispose of batteries in a fire, as there is a risk that they will explode.
•
Do not short-circuit or disassemble batteries.
•
Avoid contact of the fluid inside the battery with skin, eyes, and mucous membranes.
•
In the event of coming into contact with the fluid inside the battery, immediately flush the affected areas with
plenty of clean water and consult a physician.
•
If batteries are swallowed or otherwise ingested, consult a physician immediately.
•
Do not repair the product under any circumstances. It may only be handled or repaired by an authorised
professional.
•
The device is not completely watertight! It is considered waterproof, sweatproof, rainproof and splashproof.
•
Do not expose the device to liquids without first removing the cable connection. Do not expose it to water while
charging it, as this may permanently damage the speaker or power source.
•
If not washed off after use, chemicals and salt in your pool or the sea can damage the waterproof seals or the
surface of the connector of your device. After spilling liquid on the speaker or rinsing it, do not charge again until
it is completely clean and dry. Charging your speaker when wet can damage it.
•
When using an external adapter, the output voltage/power of the external adapter should not exceed 5V/1A.
Publicidad
