Publicidad
Idiomas disponibles
Idiomas disponibles
4 Connection to water supply
Threaded pipe connection
Hose connection
b.
997702
a. Screw R
1
2
b. Screw the required thread adapter
3
a. Unscrew the water inlet nozzle (with
b. Screw the water inlet nozzle (with
a.
c. Slide the water supply hose on the
c.
3
/
" (2) sleeve nut tightly on
4
water tap (1). A thread adapter for
with a gasket made out of rubber
(NBR) is included. Reducers are
available as accessories for
22 x 1 (aerator thread), seeOrdering
Information, p. 28 .
tightly on the water tap. Then
connect the device. Do not use force.
sleeve nut) from the water pump.
hose nipple) tightly on the pump.
tube nipple till it fits tightly. Secure
the water supply hose with a clip.
1
/
"
2
3
/
" and M
8
Operating manual
23
Publicidad
