Descargar Imprimir esta página

EVVO MI45 GLASS Manual De Instrucciones página 25

Publicidad

3. INSTALLATION
- The microwave must be placed on a flat, stable and dry place and kept away from
corrosive materials, heat sources, and humidity, such as gas burners or water.
- Microwave size:
Widht (mm)
595
The microwave must be sufficiently ventilated. To that end, follow the instructions
below:
- Leave a space of 20 mm around the microwave.
- Follow the indications in figure 3 about the size of the opening where you want to
install the microwave.
- The furniture piece must be 20 mm thick.
Follow the procedure below to install the microwave:
1. Make sure the space requirements mentioned above are met.
2. Insert the microwave in its entirety into the furniture piece. Fig. 4
3. Centre the microwave in the furniture piece's recess. Fig. 5
4. Use the screws provided with the microwave to secure it to the furniture piece as
shown in figure 6.
- The microwave must be placed in such way that the plug is accessible and that an
effective ground connection is provided in case of power leakage.
- The microwave door must be closed to operate.
- Should there be any manufacturing-product remains inside the microwave, leave
the microwave door open to ensure good ventilation. It is recommended to repeatedly
heat up a glass of water at high power in the first few uses.
4. OPERATION
Before cooking
Plug the microwave into the outlet. The display will light up, enter Standby mode, and
show 1:00.
Microwave function
There are five firepower levels, 100P, 80P, 50P, 30P and 10P, respectively. Press the
"Microw." button continuously and select the desired microwave power. Press the "^"
or "V" buttons to increase or decrease cooking time, the time range can be selected is
from 0:10 to 60:00. After select the time, press "START/+30s." button to start work. An
Height (mm)
385
MICROONDAS INTEGRABLE EVVO MI45 GLASS
ENGLISH
Depht (mm)
368
25

Publicidad

loading

Productos relacionados para EVVO MI45 GLASS