PowerSmith PBL120J Manual Del Operario página 8

FIG 1
5
1. Blower Tube
2. Trigger Switch
3. Speed Selector
ASSEMBLY AND ADJUSTMENTS
Warning:
disconnected before adjusting, adding accessories, or checking a function on the tool.
ASSEMBLING AND DISASSEMBLING THE BLOWER TUBE
1
Install the blower tube to the motor housing as shown in Fig 2. Check and make sure the blower tube is firmly secured.
Disassemble the blower tube as shown in Fig 3. Do not try to separate the tube by force or by using tools.
NOTE:
Before disassembling the blower tube, be sure the trigger switch is in the OFF position.
kNOWINg YOUR BLOWER
6
4. Handle
5. Battery Pack
6. Battery Locking Tab
always be sure that the product is switched off and the battery is
2
FIG 2
English
4
3
2
2
8
1
1
FIG 3