Installation
Instructions
MOVING THE REFRIGERATOR
(CONT.)
I-_ DISCONNECT THE POWER COUPLING
(on some models)
If the refrigerator
has a water
dispenser,
there is a power line (harness) from the cabinet
into the bottom hinge on the freezer door that
must be disconnected.
To disconnect,
pull apart at the coupling.
Bottom
freezer
hing_
r_ DISCONNECT THE ELECTRICAL
CONNECTORS Ion some models)
If the refrigerator
has a refreshment
center,
there are electrical
connectors
(harnesses)
from the cabinet into the bottom
hinge on the
refrigerator
door that must be disconnected.
To disconnect,
pull apart each connector.
Bottom
refrigerator
hinge
FI CLOSE THE FREEZER AND
REFRIGERATOR DOORS
E] REMOVE THE FREEZER DOOR
r_
Remove the freezer door top hinge cover (if
equipped) by either squeezing it and pulling it
up or by prying it off with a plastic putty knife.
r_
Remove the two 5/16" hex head screws, then
lift the hinge straight
up to free the hinge pin.
S/:]_6" Hex Head
[]
Open the freezer door to 90.°
7
90 °
2O