Product Servicing - IKEA IDASEN Instrucciones De Seguridad

Follow these instructions when
adjusting table height:
1. Make sure no objects are in the way of
the table adjusting height freely.
2. In order to run the table up/down, press
the manoeuvre button up and down
respectively or use your Desk control
app.
Safety regulations
— When the table is run up/down, keep
the necessary safety distance to avoid
the risk to get squeezed between the
moving table top and fixed objects in
the surrounding area.
— When the table is run up/down the
user shall keep watch so that nobody
is injured or no object is damaged. The
table top must not bump into a fixed
object so that the table is overturned.
Always remove any office chair before
the table is run up/down.
— The table tripod must not be altered or
reconstructed in any way. In service and
repair work of the table, the electrical
cable must always be disconnected from
the wall socket.
— Modifications to the legs are absolutely
forbidden!
— The table must not be used as a hoisting
device for persons.
Maintenance and repair instructions
— After approx. 1 week of use, check that
the screws are properly tightened.
— If the table cannot be lowered or raised,
check the connections between the legs
and the wall socket and be sure your
phone/Bluethoth device is turned on
and connected through the Desk Control
app.
— If any part of the electrical system is
replaced, the electrical cable must first
be disconnected from the wall socket.
Replace the electrical part and then
connect the electrical cable to the wall
socket. The table is now ready for use.
If the table still does not work, please
contact your nearest IKEA store or
customer service.

PRODUCT SERVICING

Do not attempt to repair this product
yourself, as opening or removing covers
may expose you to dangerous voltage
points or other risks.
Manufacturer:
IKEA of Sweden AB
Address:
Box 702, SE-343 81 ÄLMHULT
SAVE THESE
INSTRUCTIONS
6