Style selections 51540 Manual Del Usuario página 9

ASSEMBLY INSTRUCTIONS
7. Place the glass tube (E) into the top of the glass
tube ring (B).
8. Remove the 3 preassembled screws from the
upper supporters (I). Place the upper reflector (A)
onto the top of the upper supporters (I). Replace
the 3 screws removed at the beginning of this
step to secure the upper reflector (A) to the upper
supporters (I). Be sure to fully tighten.
9. Attach the 3 mesh guards (F) onto the hooks at
the top of the upper supporters (I).
7
8
9
I
9
E
B
A
I
F