cRadia CRA 4010 Manual De Usuario página 20

IMPORTANT SAFETY WARNING
Never connect a laser printer or scanner to the UPS unit. This may cause the damage of the unit
To prevent the risk of fire or electric shock, install UPS in a temperature and humidity controlled indoor area
free of conductive contaminants. (See the specifications for the acceptable temperature and humidity range.
To reduce the risk of overheating the UPS, do not cover the UPS' cooling vents and avoid exposing the unit to
direct sunlight or installing the unit near heat emitting appliances such as heaters or furnaces.
Do not attach non-computer-related items, such as medical equipment, life-support equipment, microwave
Do not plug the UPS input into its own output. CAUTION! Do not allow liquids or any foreign object to enter the
UPS. Do not place beverages or any other liquid-containing vessels on or near the unit.
In the event of any emergency, press the OFF button and disconnect the power cord from the AC power supply
With the installation of this equipment, it should be prevented that the sum of the leakage current of the UPS
Attention hazardous through electric shock. Also with disconnection of this unit from the mains, hazardous
voltage still may be accessible through supply from battery. The battery supply should be therefore
disconnected and isolated first when maintenance or service work inside the UPS is necessary.
Servicing of batteries should be performed or supervised by personnel knowledgeable of batteries and the
required precautions. Keep unauthorized personnel away from batteries.
When replacing the batteries, use the same number and same type of batteries.
Internal battery voltage is 12VDC. Sealed, Lead-acid, 6-cell battery.
Do not dispose of batteries in a fire. The battery may explode. Do not open or mutilate the battery or batteries.
Unplug the UPS prior to cleaning and do not use liquid or spray detergent.
ovens, or vacuum cleaners to UPS.
to properly disable the UPS.
Do not attach a power strip or surge suppressor to the UPS.
to the connected consumer exceeds 3.5mA.
Released electrolyte is harmful to the skin and eyes.
EN
20