Publicidad
Idiomas disponibles
Idiomas disponibles
English
No
Description
2
3.5 mm Audio Jack
3
USB-2 Service Connector
4
RJ45 Ethernet Connector
5
12 VDC Power Input Connector
Getting Started
Connecting through Ethernet Port
1. Connect to the DC power adaptor.
2. Connect the DH300 to your local LAN using the Ethernet connector.
The DH300 IP address is Dynamic Host Configuration Protocol
(DHCP) and automatically connects to the internet and starts
provisioning in within 45 seconds.
The Transmission Control Protocol (TCP)/Internet protocol (IP) ports
must be open. The default settings are TCP port 443 and UDP ports
53 and 123.
LED Indicators
Table 2: LED Indicators
LED Indicators
Status
Solid Red
Hub is powering up.
Solid Blue
Hub is provisioning the cloud
deployment.
Blinking White
Connection established.
Blinking Green
Audio communication
transmission is in progress.
Solid Green
Transmitting audio
communication.
Solid Yellow
Internet is connected but the
hub connection to the cloud
server is not successful.
2
LED Indicators
Blinking Yellow
Blinking Red
Troubleshooting
-
-
-
-
-
Check the internet
connection.
Status
No internet connection.
Communication with the
modem is not successful.
Faulty hub.
Troubleshooting
Check the internet
connection.
Contact technical
support.
Publicidad
