Descargar Imprimir esta página

Axis Q1656-DLE Guia De Instalacion página 6

Publicidad

English
Safety information
Hazard levels
DANGER
Indicates a hazardous situation which, if not avoided,
will result in death or serious injury.
WARNING
Indicates a hazardous situation which, if not avoided,
could result in death or serious injury.
CAUTION
Indicates a hazardous situation which, if not avoided,
could result in minor or moderate injury.
NO TICE
TICE
NO
NO
TICE
Indicates a situation which, if not avoided, could result
in damage to property.
Other message levels
Important
Indicates significant information which is essential for
the product to function correctly.
Note
Indicates useful information which helps in getting
the most out of the product.
Safety instructions
NO TICE
NO
NO
TICE
TICE
The Axis product shall be used in compliance with
local laws and regulations.
Store the Axis product in a dry and ventilated
environment.
Avoid exposing the Axis product to shocks or heavy
pressure.
Avoid exposing the Axis product to vibration.
Do not install the product on unstable poles,
brackets, surfaces or walls.
Do not install the product on vibrating poles,
brackets, surfaces or walls.
Use only applicable tools when installing the Axis
product. Using excessive force with power tools
could cause damage to the product.
Use a clean cloth dampened with pure water for
cleaning.
Use only accessories that comply with the technical
specification of your product. These can be provided
by Axis or a third party. Axis recommends using
Axis power source equipment compatible with your
product.
Use only spare parts provided by or recommended
by Axis.
Do not attempt to repair the product yourself.
Contact Axis support or your Axis reseller for
service matters.
The power supply shall be plugged in to a socket
outlet installed near the product and shall be easily
accessible.
Use a limited power source (LPS) with a rated
output power limited to ≤100 W and a rated output
current limited to ≤5 A.
Use a yellow/green colored grounding cable of at
2
least 0.5 mm
or 20 AWG.
Transportation
NO TICE
TICE
NO
NO
TICE
When transporting the Axis product, use the
original packaging or equivalent to prevent damage
to the product.
Battery
The Axis product uses a 3.0 V BR2032 lithium battery
as the power supply for its internal real-time clock
(RTC). Under normal conditions this battery will last
for a minimum of five years.
Low battery power affects the operation of the RTC,
causing it to reset at every power-up. When the
battery needs replacing, a log message will appear
in the product's server report. For more information
about the server report, see the product´s web page
or contact Axis support.
WARNING
Risk of explosion if the battery is incorrectly
replaced.
The battery should be replaced with an identical
battery only.
Used batteries should be disposed of according to
local regulations or the battery manufacturer's
instructions.
CAUTION
Do not replace the battery yourself. Contact Axis
support if the log message requests a battery change.
Lithium coin cell 3.0 V batteries contain
1,2-dimethoxyethane; ethylene glycol dimethyl ether
(EGDME), CAS no. 110-71-4.
Français
Informations sur la sécurité
Niveaux de risques
DANGER
Indique une situation dangereuse qui, si elle n'est pas
évitée, entraînera le décès ou des blessures graves.
AVERTISSEMENT
Indique une situation dangereuse qui, si elle n'est pas
évitée, pourrait entraîner le décès ou des blessures
graves.
ATTENTION
Indique une situation dangereuse qui, si elle n'est
pas évitée, pourrait entraîner des blessures légères ou
modérées.
REMARQUE
REMARQUE
REMARQUE
Indique une situation qui, si elle n'est pas évitée,
pourrait endommager l'appareil.
Autres niveaux de message
Important
Indique les informations importantes, nécessaires pour
assurer le bon fonctionnement de l'appareil.

Publicidad

loading