Publicidad
Idiomas disponibles
Idiomas disponibles
Pool Preparation
Before installing the "Wheels Vac" Aboveground Suction Side Pool Cleaner, your pool should be clean and algae-free so as
to not inhibit the cleaner's traction. If necessary, make the following preparations before proceeding:
1. Chemically balance the pool water.
2. Brush pool and let the debris settle.
3. Hand vacuum thoroughly.
4. Clean filter and pump strainer basket.
Cleaner Components
Remove the cleaner and all parts from the box. Check to be sure all components are included.
1. "Wheels Vac" cleaner body
2. Hose float
3. Valve cap
4. Regulator valve
5. Conical Adaptor
6. Flow gauge
7. Hose Set – 10 Sections
--- 10 Standard Male/Female
Hoses of 1m
--- 1 Leader Hose (36cm)
Figure 1
1.
3.
2.
4.
6.
5.
4
POOL PREPARATION
7.
Leader Hose
Standard Hose
Publicidad
