Publicidad
Idiomas disponibles
Idiomas disponibles
Keypad
Cook Menu
Soften Menu
Melt Menu
Keep Warm
Steam Clean
Tone ON/OFF
10
Feature
Auto cook
Soften
Melt
Keep Warm
Auto cleaning cycle
Turn on or off beep sound
Instructions
For Cook Menu mode, it is not necessary to set the time and power,
follow the instructions below:
1. Press "Cook Menu" button, the "P1" will show on the display.
2. Use +/- button or "Cook Menu" to select a food category. See
the Cook Menu section in this guide for the food category or
reference sticker on the front plate of the microwave.
3. Press START button.
4. Sensor Cooking: A sensor in the microwave oven detects
humidity released from the food as it heats and adjusts the cook
time accordingly.
NOTE: During the cooking process, the display with show to Turn
or Add Food (for some food only), press the STOP/UNLOCK button
to trigger the unlock function and add or turn the food using door
release button to open the door.
By pressing the STOP/UNLOCK button again will stop the cooking
function and microwave oven will switch to Standby mode.
The Soften function is used to soften food. To use:
1. Press "Soften Menu", the display will show "P1".
2. Use "Soften Menu" button or +/- button to select a food category,
see the Soften Menu section in this guide for the food category or
reference the sticker on the front plate of microwave. Press
START button to confirm.
3. Use +/- button to adjust the quantity.
4. Press START button.
The Melt function is used to melt food. To use:
1. Press "Melt Menu", the display will show "P1".
2. Use "Melt menu" button or +/- button to select a food category,
see the Melt Menu section in this guide for the food category
or reference the sticker on the front plate of microwave. Press
START button to confirm.
3. Use +/- button to adjust the quantity.
4. Press START button.
The function allows to keep your dishes warm. To use:
1. Press "Keep Warm" button, default time "30:00" will show on the
display.
2. Press "Keep Warm" or +/- button to select 15 min, 30 min,
45 min, or 60 min.
3. Press START button.
NOTE: The Keep Warm cycle last for a duration of 15 minutes
(default 30 minutes), the maximum time is 60 minutes.
Each 15 minutes cycle, microwave will be turned on 1.5 minutes,
then cavity lamp and fan are off, only the countdown time is shown.
The cleaning cycle will help to clean the microwave oven cavity.
1. Place 1 cup of water (~250 mL) on the middle of the cavity.
2. Press "Steam Clean" button, default "13:00" time will show on
display.
3. Press START button to start the function.
(After finishing the water heat-up cycle (3 minutes), the cavity
lamp and fan will be off, the countdown time is shown.)
NOTE: Please follow Tips and Suggestions in Steam Clean section.
The function allows to turn on or off the beep sound:
1. Press Steam Clean button and hold for 5 seconds to put into
mute, the Tone Off icon will be shown on display.
2. Hold the button again for 5 seconds to turn on the sound.
Publicidad
