Using Multiple Headphones On The Same Channel - Rane HA6S Guía De Usuario

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

Through the Aux inputs, you can use the six channels of HA6S independently to give individual mixes to six
different musicians. Connect the Aux Sends or Subgroup outputs directly to the Aux input of HA6S. Then
rotate the balance control on your HA6S fully to the left. This will route only the Aux In signal to the
headphones.

Using Multiple Headphones on the Same Channel

Each channel provides three headphone outputs. These jacks are all connected in parallel. For best results,
please note the impedance information:
When connecting one headphone to each channel, the minimum impedance of the headphone should
be 100 ohms.
When connecting two headphones to each channel, the minimum impedance of each headphone
should be 200 ohms.
When connecting three headphones to each channel, the minimum impedance of each headphone
should be 300 ohms.
Aux
Aux
Send 1
Send 2
Aux
Aux
Send 3
Send 4
Aux
Aux
Send 5
Send 6
5

Publicidad

Tabla de contenido
loading

Productos relacionados para Rane HA6S

Tabla de contenido