Maintenance; During Operation; After Each Use - Whittaker Smart Care TRIO Manual Del Operador

MAINTENANCE

During Operation:

- Rotate brushes every 2-3 hours of operation.
This prolongs brush life and protects against
gear damage.
- Do not lubricate axles. Keep clean and dry.
- Never rest machine with brushes directly on
the floor.

After Each Use:

A. Unplug power cord at wall outlet.
B. Remove, empty and rinse solution tank.
C. Remove, empty and rinse collection hopper.
D. Tilt machine backwards resting on its
handle.
E. Reach under with a finger and push axles
sideways and out. No tools are required if
machine is kept clean and brushes are rota-
ted regularly.
F. Remove brushes. Inspect for wear. Use the
Brush Wear Indicator hole in one end of each
axle to measure bristle length.
G. Wipe underside of machine with damp cloth.
H. Rotate the front brush end-to-end before
replacing and do the same with the other 2 brushes.
!
AS
NEEDED
(5)
Brush wear indicator
hole indicating
minimum brush length.
Axle