Publicidad
Idiomas disponibles
Idiomas disponibles
STEP 13: MOUNTING IC3 FOR USE
Two people are recommended to safely mount the IC3. Person A lifts the right side and Person B lifts the left side. Firmly grip
the Lower Brace (11) with one hand and the Vertical Frame (10) with the other hand in area's shown by arrows and lift the IC3
keeping it level.
1. Lift the unit high enough so that the top of the Vertical Frame (10) goes up and over the top of the basketball hoop. Set the
unit down so that the Rim Rest (18) rests against the basketball rim.
10
If using on a regulation 72-inch backboard with a pad, assembly is complete. START TRAINING.
If using on a pole-supported unit continue to STEP 14.
STEP 14: POLE BRACES
Get started by measuring the distance between your hoop support pole and the IC3. According to the measured distance,
locate the parts you will need in the table below and follow the instructions.
START TRAINING
11
10
DISTANCE FROM
BACKBOARD TO POLE
0"-10.5"
10.5"-18"
18"-33"
33"-48"
48"+
18
POLE BRACE USED
2a
2b
2b + Part 20
2c + Part 20
2b + 2c + Part 20
15
Publicidad
