VEVOR ZD-888 Manual Del Usuario página 13

7. Heat plate may pivot slightly back and forth rationally. This is due to the
movement allowance within the clamp assembly, and it is normal.
TROUBLE SHOOTING
1. Temperature drops when the machine starts transferring
It is normal if the machine drops within 10°C, as the printed item is
considerably cold; part of the heat is transferred from machine to the printed
item, especially when transferring patterns on mugs and plates.
2. Printed effect: print color is a pale or faded image
The pressure is not high enough or the temperate is too low, pressing time is too
short. Please adjust the pressure/ temperature or increase the heating time.
3. Printed effect: print color is too darkened, deep or blurred
Reason 1: The temperature is too high / or pressing time is too long.Please
adjust the temperature or reduce the heating time.
Reason 2: The pressing time is too short/ using poor-quality transfer paper.
Please increase the heating time or use high-quality transfer paper.
4. The display screen does not turn on or the display screen is working
but the temperature is not heating up.
Pls kindly send us your problems. Our staffs will give instructions according to
your specific problems with patience.
- 11 -