Publicidad
Idiomas disponibles
Idiomas disponibles
• Press and hold the RESET button for 5 to 10 seconds.
• Wait until you hear the notification „wait for Wi-Fi config".
• The camera is ready to connect to the application on the phone.
• Make sure that the phone is connected to the Wi-Fi network that the
device will be connected to.
• Note: for the proper operation of the camera, a connection to a 2.4 GHz
Wi-Fi network is required. The camera does not support 5GHz network.
• Press the plus (+) symbol in the upper right corner of the application
interface or select „Add Device".
• From the product categories, select „Video Surveillance" and then
„Security Camera". (Wi-Fi) „.
• Make sure the device is restarted and ready to connect (repeated „wait
for Wi-Fi config" message).
• In the upper right corner, select the camera's network connection mode
and go to the next step.
Connection modes available:
• QR code - Connection mode by scanning the QR code generated in the
application with the camera lens.
• EZ mode (recommended) - Automatic mode. In this mode, the applica-
tion searches for the camera itself.
• Cable - connection via a network cable.
• After selecting the connection mode, follow the instructions in the app.
• The camera will inform about the next stages of connection with sound
messages „connect router", „Connect internet" and „device access".
• NOTE: while connecting, do not disconnect the camera from the power
supply.
• After the device is connected successfully, give it any name in the app.
4. Removing the device
On the home screen, touch and hold the name of any of the added devices.
Then select one or more devices you want to remove and click the trash
can icon.
06. FUNCTIONS OF THE APPLICATION
1. Home screen
a. Full screen SEE FIG. B.1
The function allows us to view in full screen.
Additional functions under this tab:
• manual control of the camera head. SEE FIG. D.1
• video recording - when this function is activated, video recording is
14
Publicidad
