EN
PARTS
1 -
Assembling castors: put the appliance on a flat surface, take out the wrench from foam
box, then assemble the castors.
Attention: the back castors are with brake, but the front ones are without.
2 -
Watering: open the water in-let door, then add clean water
3 -
There is water outfall hole at the back of unit.
Attention:
a -
There is water outfall hole at the back of unit.
b -
The level of water tank should not over "MAX" scale at any time, when humidifying,
the total level of water tank should not below "MIN" scale.
c -
Put ice to the water tank if you want to strengthen the efficiency of cooling. But the
total level of water tank should not over "MAX" scale.
12