Descargar Imprimir esta página

HH Electronics Tessen TNi-W8 Manual Del Usuario página 3

Publicidad

SATELLITE WALL SPEAKER
INTRODUCTION
The Tessen wall mount installation speaker range includes 3 models: TNi-W4 (4 inch), TNi-W6 (6.5 inch) and TNi-W8 (8 inch)
providing premium audio reproduction with effortless installation. Each of the TNi-W speakers feature adjustable power settings,
and the ability to connect to 70V/100V or 8 Ohm lines. Vertical or horizontal mounting is possible using the included multi-
position steel bracket, ensuring the engineer has everything required when the box is opened on site. With Euroblock or M4
input and output connectivity, the TNi series delivers versatility for the job at hand and all enclosed in light weight ABS
enclosures.
SAFETY
The cabinets should be installed by properly qualified persons, in compliance with all local regulations and laws.
The position of installation is also bound by laws and regulations so must be taken into account in the initial planning stages.
All installation equipment used is subject to regular safety checks which must be strictly adhered to.
If any of the hardware shows any signs of wear or damage, it should be replaced immediately.
Failure to do so could result in serious injury or death!
INSTALLATION
1: Choose a suitable location for the installation. Fixing is achieved via the four M4 fixing holes (indicated below) on the included
mounting bracket.
Before proceeding, please consider the following:
The structural integrity of the mounting surface.
Ÿ
The type of fixing used. This is dependent on the structure of the mounting surface.
Ÿ
The position of the mounting bracket, and available clearance for the cabinet.
Ÿ
Rear clearance and the possibility of hidden hazards, such as wiring or pipework.
Ÿ
For added security, the use of a safety harness is advised and may be legally required in your market.
Ÿ
VERTICAL AND HORIZONTAL CLEARANCE
CEILING
Y
WALL
© 2021 HH Electronics Ltd
Z
Designed and Engineered in the UK by HH Electronics LTD.
iNSTALL
WALL
Model
X
TNi-W4
90
TNi-W6
118
TNi-W8
140
Z - A suggested minimum clearance
(Dimensions in mm)
X
Z
Y
Z
210
30
237
30
265
30
2

Publicidad

loading

Este manual también es adecuado para:

Tessen tni-w6Tessen tni-w4