Publicidad
Idiomas disponibles
Idiomas disponibles
4. Repeat steps 1
through 3 for
the other legs
so all four legs
are at the equal
and desired
height. All
settings
MUST be at the
same setting to
ensure stability
and that all four
wheels are
touching the ground.
SETTING HANDLE HEIGHT ADJUSTMENT
1. Push red height release button on back of the handle.
2. While depressing the button, pull the handles upward.
3. Move the handles upward until the desired height is reached.
4. Release the button and ensure the button snaps into place at
the corresponding hole.
5. Repeat steps 1 through 4 for the second handle so both
handles are at an equal and desired height.
ATTACHING FRONT POUCH
1. Remove pouch from packaging.
2. Unfold rollator (refer to Unfolding Rollator section on pg. 5)
and unfold pouch by releasing hook and loop straps.
3. Slide the loops on each side of the pouch over the knobs
extending from the front of the rollator's seat.
4. Slide pouch all the way onto knobs until the pouch is firmly
in place.
CANE HOLDER INSTALLATION
1. Adjust lower cane platform and upper cane holder tip to
desired setting using a 4 mm Allen wrench.
6
3 Settings
Publicidad
