Xiaomi 14 Guia De Inicio Rapido página 15

WCDMA band 1/8: 25.7 dBm
LTE band 1/3/7/8/20/28/38/40/41: 25.7 dBm, LTE band
Banda 5G NR n1/n3/n7/n8/n20/n28/n38/n40/n41: 26 dBm,Banda 5G NR n77/n78:
29 dBm
Bluetooth: 20 dBm
2.4 GHz band Wi-Fi: 20 dBm
5 GHz Wi-Fi: 5150–5250 MHz: 23 dBm, 5250–5350 MHz: 23 dBm,
5470–5725 MHz: 23 dBm, 5725–5850 MHz: 14
NFC: 13.56 MHz < 42 dBuA/m at 10 m
WPT: 110~148 KHz < 37.7 dBuA/m at 10m Distance
5G connection depends on country, carrier, and user environment.
E-label
This device has an electronic label for information about
certifications. To view this label, go to select Settings > About Phone > Certification or
go to Settings, then type "Certification"
into the search bar.
Certification information (highest SAR value)
SAR limit 10 g: 2.0 W/kg,
SAR: Head: 0.996 W/kg, Body: 0.995 W/kg (5 mm distance).
Model: 23127PN0CG
2312 indicates that the product will be launched after 202312.
When using this device as a wireless charger it is intended for use as a desktop device
and should not be carried when in this mode.
To comply with RF exposure requirements when using in the wireless charging mode
please place the device at a minimum distance of 20cm from persons.
NOM Regulations
OPERATION OF THIS DEVICE IS SUBJECT TO THE FOLLOWING
CONDITIONS:
a) This equipment or device may not cause harmful interference.
b) This equipment or device must accept any interference, including interference that
may cause undesired operation.
CONNECTION INSTRUCTIONS:
1. To connect your cell phone to electric power and to recharge the internal battery,
only use the battery charger that was provided with the equipment.
2. Plug the USB cable into the USB port on your phone.
3. Plug the USB cable into the USB port on your battery charger.
4. Plug the charger into an AC power socket (100–240 V~)
5. To disconnect the charger once the battery is charged, hold the charger firmly then
remove it from the AC socket. Never pull on the cable.
IMEI Location
The IMEI is located on a label attached to the back of your device and on the label
attached to the box.
To view the IMEI of your device, press the "telephone" icon and dial *#06# or go to
About phone > Detailed info and specs > Status > IMEI
Power:
5.0 V 3.0 A 15.0 W/ 3.6-5.0 V
⎓
Adapter:
Input: 100 -240 V~, 50 / 60 Hz, 2.0 A
Output:
5.0 V 3.0 A 15.0 W/ 3.6-5.0 V
⎓
Legal Notice
This user guide is published by Xiaomi or its local affiliated company. Xiaomi may,
without notice and at any time, make any necessary improvements or changes to
typographical errors or inaccuracies of current information found in this user guide, or
improvements to programs or equipment. However, such changes will form part of new
online editions of this user guide (for more details, please go to www.mi.com/global/
service/userguide). All images are for illustrative purposes only and may not accurately
represent the actual device.
dBm, 5945–6425 MHz: 23dBm
3.0 A (15.0 W Max)/ 5.0-20.0 V
⎓
3.0 A (15.0 W Max)/ 5.0-20.0 V
⎓
42: 26 dBm
6.1-4.5 A (90.0 W Max)
⎓
6.1-4.5 A (90.0 W Max)
⎓