Scosche RHYTHM24 Manual Del Usuario página 7

USING THE ARMBAND MONITOR
RECORD A WORKOUT
• Press and hold the Record button for 2 seconds.
- Tri-LED's will blink continuously•
• Press and hold the Record button for 2 seconds to
stop recording.
- Tri-LED's will blink 3 times.
*Note:
The number of LED's blinking indicates
remaining capacity.
3 LED's: 66% -100%
2 LED's: 33% - 66%
1 LED: 0% - 33%
• Clear all memory
- Press and hold MFB & Record button simultaneously
for 10 seconds:
*Note: Upload data before deleting from Rhythm 24.
CARE INSTRUCTIONS
• To ensure accurate readings, clean the sensor lens
with a soft cloth.
• Use a soft cloth with ONLY mild hand soap and cool
water to wipe down the armband, sensors and
plastic housing.
• Use a cotton swab and ONLY rubbing alcohol to clean
the charging contacts.
• Do not use any abrasive chemicals to clean the
Rhythm 24
Am,band, sensors or plastic housing. This
will cause permanent damage.
For complete warranty details, please visit us
at www.scosche.com or call (800) 363-4490
7