Publicidad
Idiomas disponibles
Idiomas disponibles
5. CONTROL PANEL:
> MENU button: press several times to navigate through the option menu.
> UP button: used to increase the selected value.
> FOG/DOWN button: used to decrease the selected value. When no dmx cable is connected, this button will start the
manual working mode.
> ENTER/STOP button: used to confirm the selected value. When no dmx cable is connected, this button will stop the
manual working mode.
6. STATUS MONITOR: Maximum water level, minimum water level, DMX signal reception
7. DMX INPUT: 3-pin male connector, used to connect the fogger directly to a DMX-controller or to the previous unit in
the DMX chain.
8. POWER SWITCH: TURN ON/OFF POWER.
9. BREAKER: First locate and solve the problem that caused the breaker to be activated.When the problem is solved, push
the button to reset the breaker.
10. MAINS CONNECTOR: Insert the supplied mains cable here and connect it to in a mains wall socket with earth
connection.
11. FOG OUTPUT HOLE: Please connect fog hose and out output nozzle.
MENU SETTINGS
Control panel operation. The machine can be operated with the integrated
digital control interface.
Button
Interval set (5-200sec)
Duration set (1-200sec)
Timer out (1-100%)
[MENU]
Volume out (1-100%)
Fan Speed (1-100%)
DMX Add (001-512)
Fluid running out protection
[TIMER] [UP]
Up/Activate Timer function
[VOLUME]
Down/Activate Volume
[DOWN]
[STOP]
CANALES DMX
CANAL
CANAL 1
CANAL 2
Function
function
Stop / Exit
User Manual | TB-WATER-2000 by Triton Blue | January 2024 | www.triton-blue.com | Exclusive Professional Use
Explanation
Timer mode
setting
Velocidad ventilador
Salida de humo
Función
11.
Publicidad
