Publicidad
Idiomas disponibles
Idiomas disponibles
6.
Locate the bucket and place handle in notch on
the boy's hand. (Fig. 6)
7. Fill the basin with clean water to a minimum of
75% full, completely submerging the pump.
The pump will not work if it is not completely
submerged at all times. (Fig. 7)
NOTE: To help prevent mineral build-up
and keep the fountain clean, distilled water
is recommended.
8. To turn on the fountain, connect the adaptor to
a properly grounded outlet, following GFCI outlet
regulations. A GFCI outlet must be used. Your
fountain will begin to flow. (Fig. 8)
9. Once the fountain is on and running determine if
it needs more or less water, or if the water flow
control needs to be adjusted. Relax & enjoy
your fountain!
Notch
"Drip Loop"
5
Fig. 6
Bucket
Handle
Fig. 7
Fig. 8
Electrical Cord
Publicidad
