Descargar Imprimir esta página

PRIMEYARD TOOLPORT AKSRGB2311C Instrucciones De Montaje página 3

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 5
AKSRGB2311C
EN
Safety instructions
General information
Read and keep the assembly instructions
These assembly instructions are part of this raised bed
(hereinafter referred to as the „the product"). It con-
tains important information on assembly and handling.
Read the instructions carefully, especially the safety
instructions, before using the product. Failure to follow
the assembly and safety instructions can result in seri-
ous injury or damage to the product.
The instructions are based on the standards and regu-
lations applicable in the European Union. Please also
observe country-specific guidelines and laws abroad.
Keep the assembly instructions for future use. If you
pass the product on to a third party, be sure to include
these instructions.
Intended use
The product is designed exclusively for growing plants
and creating raised beds. It is intended exclusively for
private use and is not suitable for commercial use.
Only use the product as described in these assembly
instructions. Any other use is considered improper and
may result in damage to property or even personal in-
jury. The product is not a children's toy.
The manufacturer or dealer accepts no liability for da-
mage caused by improper or incorrect use.
Safety instructions
Choking hazard!
Children can swallow the small parts included in the
delivery contents (e.g. screws) and choke on them.
When playing, children can put the packaging film over
their heads or get caught in it and choke on it.
u Do not allow children to play with the packaging film
and the small parts it contains.
Risk of injury!
Improper handling of the product can lead to injuries.
u Keep the product away from naked flames and hot 
surfaces (e.g. barbecues). Do not light a fire near the
product. - Position the product so that it does not be-
come a tripping hazard.
u Some metal parts have sharp edges that can cause
cuts. It is therefore recommended to remove the sharp
edges with a file as a precaution. 
u Assembly should be carried out by 1-2 people. It is 
recommended that protective gloves are worn during
installation.
Before assembly
Check product and delivery contents!
Risk of damage!
If you open the packaging carelessly with a sharp knife
or other pointed objects, the product can quickly beco-
me damaged.
u Be very careful when opening.
u Remove the product from the packaging, check whet-
her the delivery is complete and check whether the
product or the individual parts are damaged. If this is
the case, do not use the product. Contact the manufac-
turer immediately.
Installation site
Risk of damage!
An unsuitable installation location can lead to damage
to the product.
u Place the product on a level and horizontal surface,
ideally on garden soil.
u Ensure that the product is stable: It must be a place
unnaffected by vibrations.
u To optimise natural sunlight, the product should ide-
ally be positioned in a north-south direction.
u We recommend that you use grass edging or concrete 
blocks under each corner to prevent the product from
settling. Align these so that the product is level.
Assembly
Risk of injury!
Improper handling of the product can lead to injuries.
u The delivery contents include many connections, so 
be careful to avoid crushing your hands.
Risk of damage!
Improper handling of the product may result in damage
to the product.
u Set up the product carefully and on a level surface.
u Assemble the product using the following instruc-
tions and diagrams.
Cleaning and care
Risk of damage!
Do not use aggressive cleaning agents, brushes with
metal or nylon bristles or sharp or metallic cleaning
objects such as knives, hard spatulas and the like. The-
se can damage the surfaces. Use a damp cloth to re-
move any dirt.
A
B
C
D
E
F
4
2
2
4
8
1
2
3

Publicidad

loading