Publicidad
Idiomas disponibles
Idiomas disponibles
OPERATING INSTRUCTIONS
1. Adjust the settings by sliding the ring at the
bottom of the unit. Choose from off, low air
temperature, medium air temperature, high air
temperature, and smoothing mode. Only use
smoothing mode on dry hair.
2. When in smoothing mode, the smoothing plate
readiness indicator light is yellow while the
plates are heating up, and green when they are
hot and ready to use.
3. Hold onto the cool-touch tip for more control
during styling.
4. Do not cover or block the inlet air filter during use.
5. Press the ALCI button to reset the unit. See
Troubleshooting for more information.
For further operating instructions,
please consult the Styling Guide or scan
the QR code.
Storage, Cord Safety, and Maintenance/Cleaning:
• Ensure the cord is not knotted, twisted, or
wrapped around any objects when in use.
• Store the unit in a dry location away from water
and heat sources. To help prevent bristle damage,
store the unit so the bristles are not touching
any surfaces. Ensure the smoothing plates have
completely cooled before storing the unit.
• Clean the inlet air filter at the bottom of the unit
monthly. To clean the filter, make sure the unit is
off and unplugged, then use a new toothbrush to
brush off any dust or debris from the filter.
• To help maintain performance, remove any hair
from the brush after every use.
• Clean the heated smoothing combs regularly
to avoid product buildup. To clean the heated
smoothing combs, turn the unit off and unplug it.
Let the unit cool completely. Remove all hair from
the brush using your fingers and/or a hair pick.
Rub a baby wipe between the comb teeth to help
remove any built-up hair product.
3
2
1
4
5
TROUBLESHOOTING
MAINTENANCE/CLEANING
There is a reduction in airflow.
Make sure you are not covering the filter cover with
your hand when operating the unit. This will block the
air inlet, which could cause a reduction in airflow. A
change in airflow or air power, airflow blockages, and/
or visible buildup on the inlet at the bottom of the unit
could also indicate your unit needs to be cleaned. To
maintain performance, clean the filter at the bottom of
the unit every month, using a new toothbrush.
ALCI OPERATION
Electricity flickers or trips circuit breaker
during use.
This unit is equipped with an Appliance Leakage
Circuit Interrupter (ALCI), a safety feature that
renders it inoperable under abnormal conditions.
Should the unit turn off while in use, press the
red Reset button on the plug and the unit should
function normally. If the unit does not reset, please
check your circuit breaker. If the issue persists,
ensure there are no other appliances plugged in
within the room where the unit is being used. Do not
use the unit with a power strip.
Please scan the QR code for
additional troubleshooting or
contact Customer Service
at 855-522-0912.
Publicidad
