Publicidad
Idiomas disponibles
Idiomas disponibles
ASSEMBLY INSTRUCTIONS
7. Insert 4 fresh AA BATTERIES into the battery
compartment located on the CONTROL BOX.
Use a small crosshead/Phillips screwdriver
to remove the battery compartment cover.
OPERATING INSTRUCTIONS
8. Move the switch to the ON position. Move in
front of the item or make a loud sound (clap)
to activate the item.
Turn the item to the OFF position
when not in use.
OPTIONAL DEMO SET UP
FOOTPAD IS NOT INCLUDED.
MUST BE PURCHASED SEPARATELY.
1. Insert the cable from optional footpad
into the jack labeled DEMO JACK on the
CONTROL BOX.
2. Place the switch in the DEMO position
to enable DEMO activation.
3. Step on the FOOTPAD to
activate the scary sequence!
7
8
7
Publicidad
