MC CAMPING MC-65L Manual Del Usuario página 17

Mc Camping Compressor fridge MC-65L | 713512
5) Attach the fridge to the cabinet wall: the screw holder is built in the side wall of the refrigerator.
A hole needs to be drilled through the screw holder into the side panel.
Use a screw (M5, 15mm minimum) and fix it on the wall. After that use the screw cover to cover
the screw head (screws are not included).
6) Verify the installation: once the installation had been finished, check the continuity of the earth
circuit and carry out all electrical safety testing provided by current regulations. Protect and fix
the cables in order to prevent accidental pulling of the cable from disconnecting it from the con-
nections or coming into contact with hot parts with a temperature above 50° C or with sharp
parts.
5. REVERSIBLE DOOR
Reversible door that can be opened from left to right or from right to left.
Follow the steps below if necessary:
1. Unscrew the bottom hinge and take off the door body (keep the fridge stable).
2. Unscrew and take off the door latch, and install it into the other side.
3. Move the top and bottom door axle to the other side, and install the door to the refrigerator; fas-
ten the top and bottom door axles with the top and bottom hinges; screw the door with the
hinges, the door opening direction is now reversed.
Top door axle
New position
of top axle
Bottom door
axle
New location
of door latch
New position of
bottom door axle
17
Decorative locking
plate
Bottom hinge
EN
New location of
decorative
locking plate
Door latch