Publicidad
Idiomas disponibles
Idiomas disponibles
SE 2080
basins or other vessels containing water.
• When the hairdryer is used in a bathroom, unplug it after
use since the proximity of water presents a hazard even
when the hairdryer is switched off.
• For additional protection, the installation of a residual
current device (RCD) having a rated residual operating
current not exceeding 30mA is advisable in the electrical
circuit supplying the bathroom. Ask your installer for
advice.
DESCRIPTION
1. Concentrator
2. Air inlet filter
3. Cold air button
4. Folding handle
5. Speed knob
6. Diffuser
7. Hang-up handle
DRYING
1. Put the plug in the wall socket. Make sure the switch is always in position 0 when you plug it.
2. Switch the appliance on by selecting the desired setting.
a. Position 1, low speed and warm air flow, to shape your hairstyle.
b. Position 2, high speed and very hot air flow, for quick drying.
c. Cool button, push this button in whatever of two positions (1 or 2) and hairdryer will work with
cool air flow in low speed or high speed.
3. Dry your hair by making brushing movements while holding the dryer at a small distance from your hair.
4. When you finish, select in switch 0 position and unplug the hairdryer.
STYLING ATTACHMENTS
Concentrator
The concentrator enables you to direct the airflow at your hair that you are styling.
Connect the concentrator by simply snapping it onto the appliance. Disconnect it by pulling it off.
Diffuser
The diffuser enables to distribute the air flow by greater surface of hair. It is recommended use it to dry and
shape curling hair. Connect it snapping onto the appliance. Disconnect it by pulling it off.
With both accessories you should wait to cool those down before remove them because they will be hot
after using and you could burn.
CLEANING
1. Unplug the appliance before cleaning.
2. Remove the grill in order to eliminate the dust and hair.
3. The appliance can be cleaned with a dry cloth.
8
Publicidad
