Gluckstein Elements 39656-HBCLED Guía De Uso Y Mantenimiento página 6

Installation (continued)
3
Making the electrical connections
and attaching the canopy
NOTE: Always use wire nuts (AA) to connect wires, and
push all excess wires and connections back into the outlet
box (not included).
□
Push all slack fixture wire through the canopy loop (KK)
and into the outlet box. Trim the excess fixture wire,
leaving a minimum of 6 in. hanging out of the outlet box.
□
Connect the ground wire from the branch circuit to the
ground screw (CC) on the crossbar (DD).
□ Connect the pendant cable as follows:
WIRE MARKED
WITHOUT WORDS
FROM FIXTURE
WIRE MARKED
WITH WORDS
FROM FIXTURE
GROUND WIRE
FROM FIXTURE
Attach the canopy (FF) to the outlet box, and secure it
□
with the loop ring (LL).
CC
FF
WHITE WIRE
FROM HOUSE
BLACK WIRE
FROM HOUSE
GROUND WIRE
FROM HOUSE
DD
KK
AA
LL
4
Caulking the canopy and installing
the glass
□
Caulk (not included) the space between the ceiling
and the canopy to prevent water seeping into the
junction box.
Put the glass (B) into the cooling cup of the fixture body
□
(A) and turn the glass to the right until it is tightened.
6
A
B
Cooling cup