Ottocast A2AIR Pro Manual De Instrucciones página 5

Firmware update
Firmware update is NOT recommended when every
function works well.
1. If you have connected to Android Auto wirelessly,
disable Bluetooth and forget the Wi-Fi network
first.
2. While powered on, press the button and hold for
3s then release. The led indicator will switch to
green light after 1-2 seconds.
8
3. On your phone, go to Wi-Fi >> Advanced settings
>> Wi-Fi direct, tap [OTTO-xxxx] and make sure it
has connected
OTTO
4. Enter 192.168.1.101 on smartphone browser,
next tap "Update".
NOTE! The blue and red LED indicators will flash
alternatives while updating. Wait for more 30s after
the white indicator is solid, then disconnect and
reconnect the adapter from USB port to finish the
whole update.
9