SoluM WC32FAFSA Guía De Configuración Rápida página 4

Wall Mount Bracket
WC43UAFSA
WC55UAFSA
WC65UAFSA
30mm
DEPEND ON THE DISTANCEWALL
MODEL
▪ To install bracket properly, please read the installation guide carefully
▪ Please ask authorized installation company to install the bracket.
▪ If you are not clear with installation guide, please contact our company.
Assembly Steps
WC32FAFSA, WC43UAFSA, WC55UAFSA, WC65UAFSA
WC32FAFSA
ANCHOR
WALL PLATE
37~65" 40kg
FITS 37" - 65" MAX WEIGHT 40KG
DISPLAY
M6 SCREW
UP
WC43UAFSA, WC55UAFSA, WC65UAFSA
ANCHOR
WALL
SCREW WALL PLATE
WALL PLATE
BRACKET
Installation Instruction:
1 When installing the display set and this wall mounting bracket, at least two professionals are required to perform
all the installation operations. Do not attempt to install by yourself, so as to avoid personal injuries caused by
misoperations.
2 When installing, the installation position should be specified by professionals, so that its strength can support the
gross weight of the display set and the bracket for long time. Also, measures should be taken to make sure that
the installation position has enough strength to bear outside forces. The hanging points should be on the wall
directly. Do not install at positions without enough strength, such as decorative materials or cardboard pasted on
the wall.
▪ In places with few people such as home or hotel rooms, the watching distance is 3 to 5 times the screen
diagonal size. The installation height should be appropriate to your viewing angle.
▪ To prevent accidental damage to the display set and personal safety accidents, please avoid to install the
bracket at positions that children are easy to touch as possible as you can.
3 The bracket should be installed on vertical surface. Avoid to install on gradient surface or the top of the room,
otherwise the display set may fall off and cause personal injuries.
4 If any screws or parts that assembled were loose or lost, switch off and unplug the display set, and contact
professionals to repair.
5 When installing the bracket, avoid places where are within force electricity or strong magnetic field, avoid
positions where are easy to cause noise or vibration, and avoid places where flammable gas is easy to leak.
6 To watch display programs normally and avoid eyestrain caused by direct strong light and backlighting, avoid to
install the bracket in places where there is direct strong light.
7 To prevent fire, avoid to install the bracket in places with bad conditions, such as heavy smoke, strong wind,
moisture or high-temperature heat source.
8 When installing, make sure the metal parts and screws are connected tightly, so as to prevent the screws from
loosing to cause the display set falling off and personal injuries.
9 Read and understand this installation guide seriously, and follow all the instructions strictly. Our company does
not bear responsibility for any damage and loss caused by improper installation and operations.
This mount fits for display size: 37-65"
When using a commercial wall mount or stand other than the provided wall mount bracket, you must use a product that
matches the wall mount specifications. Also, for products other than the provided wall mount bracket, the respective
supplier or installation company must guarantee their safety and SoluM is not responsible for any issues resulting from
these products.
Part List
WC32FAFSA
▪ Wall plate 1pc
▪ bracket 2pcs
▪ Screw 3pcs
▪ Anchor 3pcs
▪ M6 screw 4pcs (attached with display)
1 According to the hole size at the back of display, choose 4pcs of M6 screws (attached in package) to fix two
brackets at the back of display. Note: Please make sure two brackets are on the same height level and centered
on the display back. Please also make sure the two brackets are with the correct direction.
2 Find the proper position to locate the wall plate on the wall using screws and anchors. If necessary, please drill
the holes to ensure the screws are fixed on the wall firmly.
WALL
Note: Use a gradienter to adjust the position of the wall plate and make sure it is leveled on the wall.
SCREW
WC32FAFSA : 3pcs
WC43UAFSA, WC55UAFSA, WC65UAFSA : 4pcs
SCREW
3 Hang pre-assembled display unit on the wall plate and push the bottom of display to secure the bracket on the
wall plate. If you want to take away the display, just need pull down the straps to release the brackets. After
assembly is finished, please manage all wires and cables.
Note: At least two people are required to transport the display set.
WC43UAFSA, WC55UAFSA, WC65UAFSA
▪ Wall plate 1pc
▪ bracket 2pcs
▪ Screw 3pcs
▪ Anchor 3pcs
▪ M6 screw 4pcs (attached with display)