Publicidad
Idiomas disponibles
Idiomas disponibles
Ovation F-165CW QRG
What Is
Included
AC Power
Power Linking
AC Plug
Replacing the
Fuse
DMX Linking
DMX Connection
Master Control
Master/Slave
Connection
·
Ovation F-165CW
·
Neutrik® powerCON®
power cord
·
Warranty Card
This product has an auto-ranging power supply that can work with an input
voltage range of 100–240 VAC, 50/60 Hz.
To eliminate wear and improve its lifespan, during periods of non-use
completely disconnect from power via breaker or by unplugging it.
You can link up to 8 Ovation F-165CW products at 120 VAC, 14 at 208
VAC, or 16 at 230 VAC. Never exceed this number. Power linking cords
can be purchased separately.
Connection
AC Live
AC Neutral
AC Ground
1.
Disconnect this product from power.
2.
Using a Phillips #2 head screwdriver, unscrew the fuse holder cap
from the housing.
3.
Remove blown fuse and replace with a good fuse of the same type and
rating.
4.
Screw the fuse holder cap back in place and reconnect power.
The Ovation F-165CW will work with a DMX controller using a regular
DMX
serial
connection.
www.chauvetprofessional.com.
The Ovation F-165CW uses a regular DMX data connection for its DMX
personalities: UNO, DOS, and STD.P. See the User Manual to connect and
configure for DMX operation.
The
Ovation
F-165CW products using a regular DMX data connection. See the User
Manual to configure for Master Control operation.
The Ovation F-165CW uses the DMX data connection for its Master/Slave
mode. See the User Manual to connect and configure for Master/Slave
operation.
Wire (U.S.)
Black
White
Green/Yellow
A
DMX
F-165CW
allows
3
·
Gel frame
(7.5 in/191 mm accessories)
·
Quick Reference Guide
Wire (Europe)
Brown
Blue
Green/Yellow
Primer
is
control
of
EN
Screw Color
Yellow/Brass
Silver
Green
available
from
other
Ovation
Publicidad
