Side Panels
2 3
1
Left
1. Digital In Jack: Connect a digital audio cable with an RCA jack from an external device
providing S/PDIF digital output.
2. DC In Jack: Insert the provided AC adapter plug. If the AC adapter plug is inserted while using
the recorder on battery power, the recorder will automatically switch to adapter power. Also, if
the AC adapter plug is removed, the recorder will automatically switch to battery power.
3. USB Port (Mini-B): While playback is stopped, connect the included USB Cable to a
computer from this port to enter USB mode.
4. Card Compartment: Open the lid to access an SD card.
5. Speaker: Internal speaker of L channel.
Right
6. Speaker: Internal speaker of R channel.
7. Power Slide Switch: Slide and hold for a short time to turn power on. Slide to turn power off.
During Record and Rec-Pause Mode, the Power switch is not operational.
8. Key Lock Slide Switch: Slide switch for the Key Lock On and Off control.
9. Line Out Jacks (RCA): Insert an audio cable plug connected to an external audio device into
these jacks to output audio signals to an external device (amp, etc.).
10. Line In 2 Jack (1/8" / 3.5 mm): Insert an audio cable plug connected to an external audio
device into this jack to input the signals from the external device into the recorder.
11. Rec Level Control: Turn to adjust the record level when the Level Cont. in the preset menu
is set to Manual. The inside control (Right channel) and outside control (Left channel) turn
together unless you hold one while turning the other. The optimum recording level is when
the level meter goes as close to 0 dB as possible but does not go over.
Left
4
5
Right
6
7 8
9
10
11
5