SUNTEC HC-804A Manual De Instrucciones página 7

NOTE :
1 . the voltage of rechargeable AA batteries ( 1 . 2V ) is insufficient to
power this camera
2 . Make sure the batteries are installed correctly , mind the polarity .
the battery should be installed according to the mark .
3.2 Power on and Mode Selection
OFF - TEST - ON
You can use the Power / Mode switch to turn on the camera and
select working mode .
There are three positions for the power switch : ON / TEST / OFF . They
stand for different mode and status .
OFF Mode：
The camera is completely off . in this mode , you can load the
batteries , insert and take out the memory card . switch : ON / TEST /
OFF . They stand for different mode and status
7