installation.
This product generates, uses and can radiate radio frequency energy, and if not
installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this product does cause
harmful interference to radio or television reception,which can be determined by
turning the product off and on, the user is encouraged to try to correct the
interference by one or more of the following measures.
· Reorient or relocate the receiving antenna.
· Increase the distance between the product and receiver.
· Connect the product to an outlet on a circuit different from that to which the
receiver is connected.
· Consult the dealer or an experienced radio/TV technician for assistance.
WARNING
1.Warnings must be followed carefully to avoid body injury, improper use may
result in electric shock , fire, personal injury and other damage:
1)Keep unplug when moving the machine.
2)Keep unplug when installing accessories
3)Place on a f at and stable platform and operate under ventilated conditions
4)Wear special protective equipment when operating the machine
5)Do not use this machine in a hazardous-location.
6)Do not use when the machine is not working properly.
7)Do not disassemble and repair this machine.
8)Do not use an unsuitable AC Outlet.
9)Do not touch the heating plate when the machine is heating
10)Do not use in humid environment or contact with water Do not infiltrate liquid in
the machine to prevent fire or electric shock caused by short circuit.
11)Do not use the power supply that does not meet the rated voltage .The power
supply that does not meet the specified voltage may cause fire or electric shock.
12)Ensure that the machine is grounded so as not to cause harm to body.
13)Do not touch the rotating rod or bearing part with y ur fingers during use in
case of injuries.
14)If the machine is not in use for a long time , please unplug the power cord from
- 3 -