Publicidad
Idiomas disponibles
Idiomas disponibles
Congratulations!
You have chosen to purchase a high-quality
product. Familiarise yourself with the product
before using it for the first time.
Read the following instructions
for use carefully.
Use the product only as described and only
for the given areas of application. Store these
instructions for use carefully. When passing the
product on to third parties, please also hand
over all accompanying documents.
Scope of delivery (fig. A)
1 x suction cleaner body incl. dirt bag (1)
1 x aluminium rod, handle (2)
2 x aluminium rod, extension (3)
1 x aluminium rod, connecting piece (4)
1 x suction cup attachment, large (5)
1 x suction cup attachment, small (6)
1 x brush attachment (7)
1 x net attachment (8)
1 x hose (9)
3 x adapter (10-12)
1 x instructions for use
Technical data
Hose dimensions: approx. 5m (l)
Dimensions, aluminium rod (total):
approx. 150cm (l)
Date of manufacture (month/year):
01/2022
Intended use
The product has been designed as a cleaning
set for conventional pools with steel walls and
metal frames and for standard inflatable pools.
This product has been developed for private
leisure use.
Safety instructions
• Never leave children unsupervised with the
packaging material. Risk of suffocation.
• Check the product for damage or wear before
each use. The product may be used only
when in good working order and condition!
• Keep children away from the product.
• The product is not a toy.
• Powerful suction and extraction. While the
pump is in operation, keep hands and hair
away from the suction.
• Use the product together with the pump only
when there is no one in the pool.
• Remove the product when the pool is not in
use.
• Keep the aluminium rod away from overhead
power lines.
Assembly
There are various attachment options and
cleaning accessories that you can use. Various
different applications are explained below.
Attaching the hose to the pump
adapter (fig. B)
The product comes with three different adapter
sizes for pumps (10-12)
1. Select a suitable adapter and attach it by
screwing it on the inlet nozzle on the inside of
your pool.
Note: Before attaching the adapter remove the
filter sieve from the inlet nozzle.
2. Put the hose (9) on the adapter.
Note: To unscrew, turn the adapter in the oppo-
site direction.
Assembling the net (fig. C)
Remove large dirt particles such as leaves from
the water or the water surface manually with the
net attachment (8).
1. Connect parts (2), (3), and (4) as required.
Note: Depending on your height it is recom-
mended to use the extension (3).
2. Push the net attachment into the connecting
piece (4) until it clicks into place audibly.
Note: To remove the attachment, squeeze the
locking pin and pull the attachment off the rod
assembly. CAUTION! Mind your fingers when
squeezing the locking pin! Risk of trapping
fingers!
Assembling the brush (fig. C)
Brush off and dissolve dirt particles such as
algae from the floor and the walls manually with
the brush attachment (7) so that the filter pump
can then receive them.
1. Connect parts (2), (3), and (4) as required.
Note: Depending on your height it is recom-
mended to use the extension (3).
2. Push the brush attachment into the connecting
piece (4) until it clicks into place audibly.
Note: To remove the attachment, squeeze the
locking pin and pull the attachment off the rod
assembly. CAUTION! Mind your fingers when
squeezing the locking pin! Risk of trapping
fingers!
Assembling the suction cleaner
body and attachment (fig. D)
To use the complete product in the pool you must
first connect all necessary individual parts. You
have a choice between the large (5) or small (6)
suction cup attachment. The large suction cup
attachment is intended for sucking in fine and/
or small deposits, such as dirt and algae, from
the bottom of the pool. The small suction cup
attachment with its flat suction nozzle is used for
sucking in heavy and/or medium-sized particles,
such as sand and stones, and for cleaning the
corners/edges of the pool.
1. Connect the suction cleaner body (1) to the
hose (9) and the interconnected aluminium
rod.
2. Select the appropriate suction cup attachment
and attach it to the body of the suction clean-
er, as shown in fig. D.
Note: Check regularly that all individual parts
are securely seated.
Use
Bear in mind that for optimal use a
minimum pump capacity of 2,600 l/h is
required!
To use the product together with your filter pump,
proceed as follows:
1. Assemble the suction cleaner body (1) and
the other components, as shown in fig. D.
2. Put the product into the water.
3. Lead the hose (9) into the water in such a way
that no air remains in the hose.
Note: Make sure that you gradually sink the
hose vertically into the water, otherwise air might
collect in the hose and the cleaning process
cannot start.
4. Connect the other end of the hose to the inlet
nozzle of the pool with a suitable adapter
(10-12).
5. Switch the pump on.
6. Slowly and evenly guide the product by the
aluminium rod along the bottom of the pool.
Note: The more slowly you proceed, the less
the rubbish will be stirred up and it can then be
sucked in.
7. After a successful cleaning operation switch
the pump off and remove the product from the
water.
8. Open the body of the suction cleaner (1),
as shown in fig. E.
9. Remove the dirt bag (1b), empty and clean it
thoroughly.
Disassembly
If necessary, switch the pump off and disconnect
the hose (9) from the inlet nozzle. Disassemble
the individual parts in reverse sequence, as
described in the section on "Assembly".
Storage, cleaning
When not in use, always store the product clean
and dry at room temperature. Clean only with
water and wipe dry afterwards with a cloth.
IMPORTANT! Never clean the product with
harsh cleaning agents.
Disposal
Dispose of the article and the packaging materi-
als in accordance with current local regulations.
Packaging materials such as foil bags are not
suitable to be given to children. Keep the pack-
aging materials out of the reach of children.
Dispose of the products and the
packaging in an environmentally friendly
manner.
The recycling code is used to identify
various materials for recycling. The code
consists of the recycling symbol – which
is meant to reflect the recycling cycle – and a
number which identifies the material.
Notes on the guarantee and
service handling
The product was produced with great care and
under continuous quality control. DELTA-SPORT
HANDELSKONTOR GmbH gives private
end customers a three-year guarantee on this
product from the date of purchase (guarantee
period) in accordance with the following provi-
sions. The guarantee is only valid for material
and manufacturing defects. The guarantee does
not cover parts subject to normal wear and tear
that are thus considered wear parts (e.g. batter-
ies) or fragile parts such as switches, recharge-
able batteries, or parts made of glass.
GB/IE
7
Publicidad
