Publicidad
Idiomas disponibles
Idiomas disponibles
EN
UNISOLAR 10.24 L / 20.24 L
Unisolar L is a solar charge controller for autonomous photovoltaic system with smart LCD display able to
display following operator data:
PV data
Instant Voltage, Instant
Current and historical
Generated Energy
Through its integrated microprocessor, Unisolar provides an optimal charging current for your 12 or 24V
battery based on battery technology (Gel/Liquid/AGM), the battery's state of charge and sourrounding
temperature which influences battery voltage.
Moreover, Unisolar incorporates a 12/24V controlled output to help avoid deep discharges of your battery
and preserving their lifespan.
INSTALLATION - FIXING
Unisolar has been designed for an indoor use.
It incorporates a local temperature sensor which adjusts the load
voltage according to the surrounding temperature for an optimal
charge of your battery. Installing it near the battery is recommended.
The solar charge controller can be fixed on a solid, stable and dry
appropriate flat surface, with 2 or 3 screws (not provided). The holes
size is Ø 4,5mm.
To provide the required air circulation for cooling the solar charge
controller, leave a 5 cm free space (minimum) all around the product.
THERMAL SENSOR
Battery voltage charge depends on Surrounding temperature.
In order to deliver the correct voltage, to avoid any overcharging or
undercharging of the battery and therefore guarantee a good lifespan
for your battery, Unisolar L is delivered as standard with 1 local
temperature sensor.
You must place this sensor temperature as follow.
16
Battery data
Instant Voltage, Instant
Current, charge or discharge
www.uniteck.fr
DC ouput data
Instant discharge Current,
instant discharge voltage
and historical Energy
consumption
5cm
5cm
5cm
5cm
Publicidad
